|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
加熱圈
|
|
| 型號︰ | ￠30×30、￠50×50 |
| 品牌︰ | 耐久力 |
| 原產地︰ | 日本 |
| 單價︰ | - |
| 最少訂量︰ | 1 批 |
|
|
|
|
|
|
|
| 產品簡介 |
1. The Germany durable high temperature mica plates,possessing durable high temperature, good insulation characteristics.
2. Europe and America high temperature heating filament,possessing fast and heat dissipation,withstanding high voltage and temperatures such good characteristics.
3. Using inner hexagonal screws to screw up firmly,can be screwed up firmly and reliably,mounting easily.
4. Using Japan stainless steels,it makes the appearance of the heating filament good and beauty.possessing even heat dissipation and withstanding high temperature features.
5. Using Germany magnetic connection base,Japan durable high temperature protection cover wire and possessing good
conductivity.
﹡.Major technical index:
1. Operation condition:environmental temperature: －20～＋60℃
2. Electric field strength:Passing through voltage 1500V/50Hz＋ve sinusoidal AC current.
3. Leakage current: ＜5MA.
4. Insulation resistance: ＞50MΩ
5. Grounding resistance: ＜10Ω
6. Temperature durability:Surface temperature can reach 500℃ without any burning damage phenomenon when mounting on the machine.
7. Power dissipation tolerance: ±10%.
﹡.Installation and Operation notes:
1. The contact surface of the mounting location of the electric heating device should be flat without any uneven phenomenon.
2. This electric heating device should be kept under drying condition to avoid dipping into water and affecting its insulation ability.
3. Check the installation position and electric voltage to see whether the specifications of the electric heating devices are being matched with each other.
4. After installation,please check whether the inner hexagonal screws are screwed up tightly or not.The screws of connected-wire base and the connected wire screws are also screws up tightly or not .To avoid expansion during heating and shrinkage during cooling to affect the products'life cycle.
5. This product should be operated be operated under recommended voltage,we recommend our customers to use transformers for the great variation of day and night voltage. |
| |
| 產品優點 |
耐久力不鏽鋼塑料電熱筒、防漏膠全密封射嘴銅爐嘴,電熱板，是一種採用 的 技術電熱組件， 具有外型美觀、耐高壓耐高溫等特點。
一． 產品特點：
1、 西德耐高溫雲母板，具有耐高溫，絕緣性能良好等特點。
2、 歐美耐高溫發熱線，具有散熱快，散熱均勻，承受高壓，耐高溫等優點。
3、 用內六角螺栓緊固，牢固可靠，安裝容易。
4、 用日本產不鏽鋼，它使發熱組件的表面美觀，而且具有散熱均勻，承受高溫等各方面的優點。
5、 用西德產的磁接座，日本產的耐高溫護導線。
二． 主要技術指針：
1、 使用條件：環境溫度：－20～＋60℃ 相對溫度：90％（25℃）
2、 電氣強度：可經電壓1500V/50Hz正弦交流電耐壓試驗，曆時1MIN無擊穿現象。
3、 洩漏電流：＜5MA
4、 冷能絕緣電阻：＞50MΩ
5、 接地電阻：＜10Ω
6、 耐溫程度：裝于機上表面溫度可達500℃而無燒燬現象。
7、 功率偏差值：±10%
三． 安裝和使用注意事項：
1、 此電熱組件所裝位置接觸面應無凹凸現象。
2、 此電熱組件應放置乾燥，避免浸水以免影響它的絕緣性能。
3、 安裝時應先檢查安裝位置與電熱組件規格是否相符，使用電壓是否一致。
4、 安裝以後應再檢查內六角螺栓，按線座螺栓及接線螺栓是否鎖緊，以免熱脹冷縮影響產品的壽命。
5、 本產品應在指定電壓下使用，考慮部分地區日夜間電壓變動較大，本公司建議使用穩壓器，以免影響產品的效率和壽命。
四.訂購須知:
1、 詳細說明規格尺寸,電源種類,電壓,功率;
2、 客戶可提供圖文說明
3、 特別要求請電話聯絡 |
|
|
|
|
產品圖片
|
|
|
相關產品
|
|
|
|
|
|
|
<
| |
